|
This page contains many wireless security devices
that will, when used in conjunction with the driveway alarms
advertised on the earlier pages, provide an excellent level of
security and deterrence to any unwanted guests.
TELEPHONE DIALER WITH ENTRY/EXIT
DELAY
The Dial Alert is a device that you can place in your home or
office which will automatically dial up to nine pre-programmed
phone or pager numbers of your choice in the event of a problem.
Features:
Can be activated by several different accessory sensors
Plays a 40 second personalized message for each of the numbers
you have programmed
Entrance and exit delay of up to 75 seconds to allow
deactivation
Battery backup
The following accessories may be used with the
dialer to optimize you security:
 WIRELESS
PIR SENSOR
This is a wireless passive infrared sensor that will transmit
a wireless signal to the telephone dialer whenever an intruder
enters an unauthorized area. This unit detects the heat from the
person as they move into the area covered. The sensor will cover
an area of about 40' by 40'. Several transmitters may be used to
monitor different locations. The PIR sensor operates by a 9 volt
battery.
 WIRELESS
TEMPERATURE SENSOR
The temperature alert sensor detects a
temperature drop or rise. This unit works well when used in
conjunction with the dialer to monitor homes, stores,
outbuildings, etc when you are away. In the event of a heat
rise or loss the sensor will activate the dialer to alert the
proper parties. The sensor's range is from -20 degrees to 110
degrees F and may be adjusted to the high and low temperatures
you require.
 |
WIRELESS DOOR CONTACTS |
The wireless door contacts may be mounted on
any door and will activate the dialer when the door is opened.
The contacts, which use a 9 volt battery, work well with the
dialer because they make full use of entry and exit delay on the
dialer.
 |
WIRELESS HANDHELD TRANSMITTER |
This small transmitter , which uses a 9 volt
battery, can be carried in a pocket or purse. It can activate
dialer up to 300 feet away. It may also be used as a panic
button to summon for help for those store with limited security
that operate late hours, such as convenience stores.
SIREN
The 12 volt DC siren can be plugged into the
dialer and will sound when activated. The siren is designed for
exterior us and could be used to scare off an intruder. 120 DB
 TIMER/
LIGHT CONTROL
The timer control , when activated by our
wireless drive alert, is normally used for security reasons. It
has the ability to turn on lights, bells, horns, etc that can be
set to stay on for 2,5,10 minutes and then will shut off
automatically, or you may have the light, etc . turn on until
manually reset The control unit has an on/off switch for use
your convenience. Installation is very easy- just connect the
timer to the dry contacts on the receiver and plug in the light.
The timer control can turn on up to 250 watts of light.
 LOUD RINGING BELL
This 6" bell can be used with any of the
driveway alarms. It can be used outside or inside for people
with hearing problems. When used in conjunction with the
light/timer control it may be programmed to ring up to one hour.
LINE CARRIERS
These are designed to send a remote signal
from one building to another, providing that all locations are
downstream from one power transformer. Plug the transmitter into
a 110 volt outlet in one building, and throughout your existing
power lines, it will trip the receiver in another building. The
transmitter can be activated by a driveway alarm. A loud bell or
light plugged into the receiver would be activated.
|
 |
STROBE |
| |
|
| This strobe can
be used for the hearing impaired as well for use in noisy
environments. The amber color is best suited for this
purpose. The strobe has a flash rate of 90 flashes per
minute.
|
|
LINE
DRIVER
