The DWA-4 ( WPA 3000) 600 ft transmission driveway alarm is
packed with features the competition can only dream of and the
best thing is the PRICE - much lower and
LONGER TRANSMISSION RANGE. Read further to see why this
will be one of the best new alarms you will find today
The vehicle sensor lets you know any time a vehicle enter or
exits your property. The vehicle sensor detects metal and is
activated by the movement of a vehicle or any metal object within
a 14 foot area of the sensor.
The vehicle sensor probe best operates when buried about 6
inches deep beside or under your driveway. Then position the
transmitter in a tree or on a fence post. The actual size of the
probe 1 inch by 12 inches and will come with 50 feet of wire. When
the probe is activated the transmitter will then send a
signal to the receiver plugged into a 120 volt outlet in your home
, where a 3 second alarm is sounded. The transmitter ( powered by
a 9 volt battery also has an internal antennae to prevent it from
breaking off) to transmit the signal up to 600 feet and
will work at an Operating range: -30°F
to 120°F .
To virtually eliminate the
possibility interference of a neighbors' driveway alarm
interfering there are 256 different security codes Each receiver
comes with choice of volume controlled whistle, Westminster
Chime, Ding Dong , or Classical tone. The rubber hose drive alert
will work with all our optional driveway alarm accessories. Each
receiver will have an On/Off Switch , four form "C" relays and a
timed output of 4 seconds or 10 minutes for use with accessories.
Multiple transmitters and receivers may be used to monitor
different areas. Other accessories may be viewed on the
accessories page. This product comes with a one year warranty.
Installation is very simple. No electrician is necessary. A
chain saw or lawn edger works well to dig a trench about 3 inches
deep to bury the wire or you may rent a gas powered trencher from
the local rental center. After digging the trench bury the 3
strand shielded exterior wire ( about 1/4" in diameter).
Other accessories may be viewed on the
accessories page. This product
comes with a one year warranty.
Installation is very simple. No electrician is necessary. A
chain saw or lawn edger works well to dig a trench about 3 inches
deep to bury the wire or you may rent a gas powered trencher from
the local rental center. After digging the trench bury the 3
strand shielded exterior wire ( about 1/4" in diameter).
